Dutch

Expert Witness Services and Litigation Support from Stork

Building Panel Load Testing

Not your father's building panels

Technologies in the building panel industry are undergoing dramatic change to keep up with new materials, new technologies, and new codes. Technologies for testing and evaluating these panels have to keep pace with changes. Improper testing is costly—to your reputation and your profit margin.

Stork Materials Technology offers comprehensive analysis of the forces at work on your building panels and Structural Insulated Panels (SIPs). We invest in experienced scientists and cutting-edge equipment to provide you with today’s solutions.

Building Panel Testing Capabilities

Stork tests building panels in many different ways, including:

  • Axial Load

    Stork scientists perform this test to determine the wall load carrying capacity.Samples as long as 24 feet can be tested, using steel beams and hydraulic loading rams in our facility.

  • Transverse Load 

    Also known as wind or snow load, this test involves the uniform loading of the panels in a horizontal position. Using the load-deflection characteristics generated during the test, load design charts can be developed.

  • Diaphragmatic Load 

    When building panels are used as the main wind-resisting element, diaphragm testing is needed to develop the load carrying capabilities. This test involves numerous panels mounted to a non-rigid test frame. The sample is then loaded with deflection measurements taken at regular intervals.

  • Racking Shear 

    In addition to transverse and axial loading, wall panels are also subjected to racking shear loads. These tests conducted at Stork Materials Technology are intended to simulate wind loadings applied to adjacent wall elements.

  • Long Term Transverse Load 

    Also known as the “Cold Creep” test, it measures the effect of long term load. Panels are supported on each end and subjected to the maximum allowable design load. For 30 days the midspan deflections are monitored. After the 30-day period, scientists remove the load briefly to take readings, and then reapply it for another 30 days.

Collecting data and meeting standards

Stork uses state-of-the-art data collection systems to gather and determine the loading characteristics during testing. We test in accordance with ASTM procedures, as well as testing criteria established by building code agencies, such as ICC (International Code Council). Our personnel and facilities are routinely inspected and accredited by the ICC (formerly ICBO), Miami-Dade County, Florida, and the City of Los Angeles.

Want to learn more about building panel testing or other services we offer? Send us your question or call us toll-free at 1-888-STORK55 . 

Images/TechnicalServices/SMT/services/BuilPane1.gif

Stork locations offering Building Panel Load Testing services:

  • Stork Twin City Testing Corporation - St. Paul, MN


    • Related services: